Embroidery digitizing and vector art · 2 to 4 hour turnaround Email: info@epcotdigitizing.com

Left Chest Logo Digitizing

Small logos for polos, shirts, scrubs and uniforms, digitized by hand so small text stays sharp. $10 per design, delivered in 2 to 4 hours.

What We Take Care Of

  • Small lettering kept readable down to about 0.25 inch tall
  • Underlay chosen for pique, twill, dri-fit and fleece
  • Short trims and smart sequencing to cut run time
  • Delivered in DST, PES, EXP, JEF or your format

Size Guide

Most left chest logos are about 3.5 inches wide, and we suggest no wider than 4.5 inches. Give us one measurement and we scale the other to match.

Eagle with flags jacket back embroidery digitizing sample

Left Chest Digitizing Price

DesignPriceTurnaround
Left chest logo$102 to 4 hours
First design (new customers)Free2 to 4 hours

Left Chest Logo Digitizing Done Right

The left chest is the most popular spot for a logo on polos, work shirts, scrubs and jackets. It is also the hardest place to get small text right. At 3 to 4 inches wide, every letter is tiny, so the file needs careful planning.

Small Text Rules We Follow

  • Lettering kept at a readable height, usually no smaller than about 0.25 inch for capital letters.
  • satin stitch columns sized so letters stay open and do not fill in.
  • Thin lines thickened slightly where needed, because hair-thin artwork lines cannot be stitched as drawn.
  • Light underlay on small letters so they sit cleanly on top of pique and twill.

Common Left Chest Sizes

GarmentTypical widthNotes
Polo shirt3 to 3.5 inchesMost common size for company logos
Work shirt or jacket3.5 to 4.5 inchesA little larger for thicker fabric
Scrubs and uniforms2.5 to 3.5 inchesOften paired with a name below the logo

Pro Tip: If your logo has a long company name, ask us about a stacked version. Two short lines often read better on a left chest than one long line.

Same Logo, Other Placements

Planning to put the same logo on caps? A flat left chest file is not built for the cap frame, so order a separate cap digitizing file. Need the logo large on the back as well? See our jacket back digitizing service.

Common Left Chest Mistakes We Fix

Many shops come to us after a left chest logo failed on the machine. These are the problems we see most often, and how a properly built file avoids them.

Problem on the shirtUsual causeHow we prevent it
Letters filled inText too small or columns too narrowResize letters and widen satin columns
Gaps around outlinesNo pull compensationAdd compensation so fills meet outlines
Puckered piqueToo dense or wrong underlayLighter density with the right underlay
Thread breaksStitches too short or stackedClean stitch lengths and no stacking

What to Send With Your Order

  • Your artwork as JPG, PNG, PDF, AI, EPS or SVG. A clear phone photo also works.
  • The final size in inches. One measurement is enough, we scale the other.
  • Your machine format, such as DST, PES, EXP or JEF.
  • Thread colors, or "match my artwork".

Important: Left chest logos are $10 and arrive in 2 to 4 hours. If this is your first order, your first digitizing design is free.

Learn more about how machine embroidery works, or send your logo now.

Formats We Deliver

  • DST
  • PES
  • EXP
  • JEF
  • VP3
  • XXX
  • HUS
  • VIP
  • EMB
  • PXF
  • CND
  • Others on request

Left Chest Digitizing FAQ

What size is a left chest logo?

Most left chest logos are about 3.5 inches wide, up to about 4.5 inches. Anything larger is priced as a bigger design.

Can you make small text readable?

Yes. We adjust letter shapes, column width and underlay so small text stitches clean instead of filling in.

Can the same file run on caps?

Caps need different sequencing. Order a cap version and we build it for the cap frame.

More services:

Ready to Get Your Design Digitized?

Send your artwork now and get a stitch-ready file in 2 to 4 hours. Your first digitizing design is free.

Order Now